News

The hot-dip galvanizing process allows the galvanized parts to obtain a thicker zinc layer and zinc-iron alloy layer, and the zinc-iron alloy layer has more excellent corrosion resistance, which can ensure a longer life of the galvanized parts. In addition, the adhesion and hardness of the galvanized layer are better, which can prevent the zinc layer from being damaged due to bumping during the transportation and movement of the galvanized parts, so that the steel parts can be better protected.

The pollution of hot-dip galvanizing to the soil is very, very small, and it is basically negligible. Hot-dip galvanizing is relatively stable and does not produce excessive harmful substances. The effective service life of galvanized ground screws is up to 30-50 years. During the long period of use, ground screws will always maintain its basic properties and will not be easily changed. Therefore, hot galvanized ground screws will not cause environmental pollution.

The outbreak of 2019-nCoV is very sudden. China is the main disaster area. This large-scale virus has caused huge losses to China. However, after unremitting efforts, China's epidemic situation has been effectively controlled and continues to improve. Direction of development. In addition to China, virus transmission has also occurred in many other countries in the world. We believe that with the joint efforts of people around the world, the virus can be controlled as soon as possible. After the epidemic, engineering projects around the world will gradually begin, and our earth anchor products will become more widely used products. We welcome more friends to contact us.

Nowadays, the popularity of ground piles is becoming more and more widespread, people are using more and more earth anchors, and the prices of products from different manufacturers are also different. This is due to the quality of the products. The difference in the quality of the earth screw is the most fundamental reason for the price difference. Different manufacturers have different production processes and even use different raw materials. After hot-dip galvanizing, it is difficult for customers to see the difference, but the product life in actual use is the ultimate manifestation. Therefore, customers and friends must carefully distinguish the quality of the product when choosing a galvanized ground screw, analyze the production capacity of the manufacturer, and choose a ground screw with qualified quality.

Our company has a history of nearly 20 years since its establishment. In our development process, we have also experienced various difficulties, but we have all overcome them one by one. Because we always insist on strict inspection of product quality and provide excellent customer service. In different stages of development, we have learned different knowledge. Our different types of ground piles and pile driver machines have withstood the test of the market. At the same time, we are constantly improving our products so that our earth screws can be more in line with the market. demand.

Time flies fast. New Year 2020 is coming soon and we will have holidays. In order not to delay the delivery time of our customers' products, we are working hard to ensure that our delivery time remains unchanged. We always insist on better quality of service and let our customers reduce worries and concerns. There are many types of ground screws, so we have developed strict product inspection procedures to ensure the quality of our earth screws. The New Year is coming soon, and in this delightful time, we at HONDE also bring sincere blessings to everyone!

Thanks to the hard work and careful preparation of our company colleagues, our HONDE 2020 annual meeting has been a complete success. This year's annual meeting, we invited raw material suppliers who have cooperated for many years. We gathered together to watch the songs and dance performances prepared by our colleagues. The atmosphere was harmonious and created a better foundation for our continued cooperation in 2020. The output of our ground screw is constantly increasing. I believe that after this annual meeting, we will be more tacit understanding with our raw material partners, bringing stronger confidence for cooperation in 2020.

As a manufacture from China, we not only sell our ground screws, we also receive many questions from customers, among which there are more questions about the service life and installation method of the ground pile. Now, let `s answer these two questions. Questions. The traditional concrete foundation has a long service life, but it causes environmental damage and cannot be reused. And ground screws can perfectly avoid such problems. Our ground screw surface adopts hot-dip galvanized anti-corrosion treatment, which is not only beautiful, but also has strong anti-corrosion ability. It can make the life of the earth anchor reach about 70 years, which can fully meet your needs. When installing the earth screw, in cooperation with our pile driver machine, it can be quickly installed and removed, which can save time, labor and reduce your expenses.

As people's awareness of environmental protection gradually increases, new clean energy is being continuously promoted and used. Solar energy is one of them. It has no environmental pollution, is clean and environmentally friendly, and is a valuable renewable clean energy. If you want to obtain solar energy resources, you must have the corresponding equipment, solar panels and brackets become very important. When installing the solar bracket, the most suitable is to select ground screws, which can not damage the soil, cause pollution to the environment, and can be recycled. It follows the concept of energy saving and environmental protection. For different soil layers, there are different kinds of ground piles to choose from. With the use of pile driver machine, not only can shorten the construction cycle, but also reduce the construction cost. As a manufacturer of ground screw, we are glad to provide you with more information. Welcome to contact us.

Compared with the traditional building foundation, ground screw can be more convenient to install and reduce construction costs. At the same time, using ground piles can not only ensure the construction quality of the building, but also can be recycled and used to save resources. There are many types and sizes of earth anchors, which can fully meet customer needs. However, when installing the ground screw, you need to use installation tools. The most commonly used are electric pile driver and large pile driver machine. They can help you quickly install the spiral ground pile and reduce the labor input. For different soil types, choose the right ground piles to make your construction easier.

1. [Because of load adaptation", that is, the load size transmitted by the superstructure to the foundation is the main factor controlling the bearing capacity of the spiral pile. 2. [Because the soil layer is suitable", that is, according to the engineering geological conditions of the building site, the groundwater level and the depth of the end of the spiral pile, the bearing capacity and technical economy of the spiral pile structure are compared by various schemes. Indicator, choose the type of spiral pile. 3. [Because of the mechanical conditions", that is, the existing pile machinery and equipment of the pile foundation construction unit in this area should be considered; if it is really necessary to introduce pile machinery from other areas, it is necessary to consider its economic rationality. 4, "Because of the cost of production", that is, the use of spiral piles, the cost should be relatively low. 5, "Due to the construction period," when the construction period is tight and the environment allows, the use of spiral piles, because of its construction speed.

The advantages of ground screw are very prominent and have been widely recognized by users. They have been promoted in different application fields. However, there is a problem. How to choose the appropriate groung piles is a problem that every user should consider, especially how to know the bearing capacity of the earth anchor, which directly affects the construction quality. There are many factors affecting the bearing capacity of the earth screw, including the number and size of the spiral blades, the diameter of the spiral piles, and the degree of soil softness. Before the construction, it is necessary to fully investigate, fully understand the type of soil, the type and weight of the building, and then select the appropriate type and size of the pile according to the actual situation to ensure the firmness of the entire building.

The spiral pile has the advantages of ecological economy, rapid installation, long life, recyclability, suitable for various types of soil, etc. It perfectly replaces the traditional cement foundation and is widely used in houses, wooden houses, light steel structure building foundations, wooden plank roads, Basic installation of billboards, bus stop signs, rides, etc. Energy saving and low consumption. After use, it can be pulled out by reverse rotation, it can be reused, 100% energy-saving and environmentally friendly, can be recycled, can achieve free movement, reduce the impact on the environment, remove the remaining pollutants to zero, remove the green environment Does not destroy, in line with energy saving, low consumption, new environmental protection concept. Environmental advantages. There is no need to damage the surrounding environment, no need to excavate the land and inject cement, and the spiral pile directly hits the ground, which greatly reduces the construction cost, no mud pollution, slag transportation and construction dust.

Solar energy resources are an environmentally friendly resource, and more and more people choose to install solar systems in their homes. With the solar system installed, there are two installation options to choose from. One is to install solar energy on the ground, and the other is to install solar energy on the roof. If you have enough space, installing a solar system on the ground is your best choice. The ground-based solar system is more flexible. It can adjust the angle of the solar panel, and it can work better in different weather and time periods. At the same time, it is more convenient to install solar energy on the ground. If you choose to install solar energy on the roof, be prepared to punch holes in the roof. And the roof solar energy can't adjust the angle and direction, it is not very convenient to clean the solar panel.

The hot-dip galvanizing process is a common process that can make the product more beautiful, has a better rust-proof effect, and prolongs the service life of different galvanized products. It should be noted here that before galvanizing, adequate preparation should be done, otherwise the galvanizing quality of galvanized products will be affected. In the product design phase, drain holes and vent holes need to be reserved, which helps to allow excess galvanizing solution to drain smoothly during galvanizing. Secondly, it is necessary to remove the oil stain on the surface of the product before galvanizing. The commonly used degreasing method has pickling, which can remove rust and stain on the surface of the product, which can help the galvanized layer to adhere better to the surface of the product, avoiding the occurrence of uneven galvanizing and zinc plating.

The surface is hot-dip galvanized for better anti-corrosion effect The number of ground piles can be used to meet the needs of different applications. Earth anchor replaces traditional digging concrete building foundation and can be reused In addition, an important feature of ground screws is that it does not damage the soil and vegetation. If you need to work on a lawn or a place with roots in the soil, choose galvanized ground screw would be your best choice. Because ground screw can be used to avoid excavation of the soil, causing damage to the surface vegetation and roots of the trees. You only need to choose the installation location and install it with mechanical equipment. At the same time, using the earth anchor will also lower your construction costs and bring you the best economic benefits.

The electric ground screw driver is a manually operated power tool designed for small-scale installation of ground screws such as billboards, road signs, fences, etc. Compared with the traditional tile driver, the electric ground screw driver is lighter and can be operated by one person. It is low in noise and does not cause harm to the human body and the surrounding environment. After improving the product, we make the product even better. After a long time of use, the click will not overheat.

1. Incoming goods inspection, also known as factory inspection: This is the inspection by the inspection department before entering the warehouse for raw materials and purchased parts. The purpose of this is to understand whether the quality of the raw materials provided by the supplier can meet the requirements. The quality requirements for the production of spiral piles, and the relevant acceptance criteria for future batch acceptance; 2. Process inspection: It is to inspect the quality of the spiral piles and the quality-related elements in the production process. The purpose of the process inspection is to prevent unqualified spiral piles from entering the next process and avoid the occurrence of batches of unqualified products. Once the inspection fails, the cause should be quickly identified, corrective or improvement measures should be taken in time, and the non-conforming product should not be transferred to the next process; 3. Completion inspection: refers to the inspection of semi-finished products or finished spiral piles after the completion of all processes in a processing production line or assembly workshop. For the reworked spiral piles, it must be re-inspected, and only after the finished product inspection is qualified. Assembly and delivery of spiral piles.

I believe many people will have this question: Can you use ground screw in winter? Why are there such questions? This needs to start from the concrete pile foundation. Most people know that concrete piles can be used in summer. It is very complicated to use concrete piles in winter or concrete piles in winter. For some reason, we have to arrange work in winter. So you need to know other ways to install the pile foundation, such as ground screw. The first thing to tell everyone is that the ground screws can be used normally in winter, and its service life will not be affected, the same is sturdy. If you need to install ground piles in the winter, all you have to do is heat the soil in the construction site in advance, and the work is as simple as installing the ground screws in the summer. If you have any other questions, please feel free to contact us and we will provide you with a more detailed construction plan.

Hot-dip galvanizing is an effective metal anti-corrosion method and is mainly used in metal structure facilities in various industries. The main advantages are: 1. Low processing cost: the cost of hot dip galvanizing rust is lower than that of other paint coatings; 2, durable: in the suburban environment, the standard hot-dip galvanized rust thickness can be maintained for more than 50 years without repair; in urban or offshore areas, the standard hot-dip galvanized rust layer can be maintained for 20 years without repairing ; 3. Good reliability: the galvanized layer and the steel are metallurgically combined and become a part of the steel surface, so the durability of the coating is relatively reliable; 4. The toughness of the coating: The galvanized layer forms a special metallurgical structure that can withstand mechanical damage during transportation and use; 5, comprehensive protection: each part of the plated parts can be plated with zinc, even in the depressions, sharp corners and hidden places can be fully protected; 6, save time and effort: the galvanizing process is faster than other coating construction methods, and can avoid the time required to paint on the construction site after installation. 7. Low initial cost: Under normal circumstances, the cost of hot dip galvanizing is lower than that of other protective coatings. The reason is very simple. Other protective coatings such as sanding paint are labor-intensive processes, whereas hot dip galvanizing processes are high. Mechanized, tightly controlled in-plant construction. 8. Simple and convenient inspection: hot dip galvanized layer can be tested visually and simply non-destructive coating thickness gauge 9. Reliability: The specifications of hot dip galvanizing are generally carried out in accordance with BS EN ISO 1461, and the minimum zinc layer thickness is limited, so the rust prevention period and performance are reliable and predictable.